Fabrication
This Service involves the fabrication of a raw PCB only .
Requested turn around time (working days)
10 Days (Std.)
15 Days (Lower Cost)
20 Days (Best Cost)
5 Days
4 Days
3 Days
2 Days
24 hours
Board Name
(Optional, helpful)
Board Part Number
(Required)
Quantity of boards to be manufactured
(Required)
Board Material
FR4
FR4 Hi-Temp
CEM 1
CEM 3
Kapton
G-10
Teflon
Polyimide
Getek
Roger's 4003
Roger's 4403
Roger's 4350B
Roger's 4450B
Roger's 3003
Roger's 3010
Roger's 3203
Roger's 3210
Roger's RF-35P
Roger's D5880
Roger's Other
Typically "FR4"
Board size (Length X Width)
X
inches (Required)
Board Shape
Square / Rectangle
Circle
ISA Card
PCI Card
VME Card
PCMCIA Card
PC104 Card
Unique / Other (specify)
If You Selected Other, Specify:
Board Panelization
One-Up PCB
Arrayed PCB w/ Routes
Arrayed PCB w/ Routes and Scores
Arrayed PCB w/ Scores
Board Thickness
.062 (Typical PCB) .018 .031 (Typical PCMCIA) .047 .093 (Typical VME) .125 (Typical Back Plane) Other, please specify
inchesIf You Selected Other, Specify:
inches
Number of Copper Layers
2
1
4
6
8
10
12
14
16
18
20
22
Typically 2-4
Base Copper Weight
1oz, typical
.25oz
.5oz
2oz
3oz
Plating Copper Weight
1oz, Typical
2oz, Occasional
3oz, Special
4oz, Special
5oz, Special
6oz, Special
7oz, Special
8oz, Special
Estimated Number of Holes (per board, +/- 5%)
(required)
Estimated Number of Different Drill Sizes (per board, +/- 5%)
Typically 8 (required)
Smallest Drill Size
.018 (normal)
.004 (HDI Laser)
.005 (HDI Laser)
.006 (HDI Laser)
.007 (HDI Laser)
.008 (HDI Laser)
.009 (HDI Laser)
.010
.011
.012
.013
.014
.015
.016
.017
.019
.020
.021
.022
.023
.024
.025
Blind Vias?
No
Yes
Typically "No"
Buried Vias?
No
Yes
Typically "No"
Board Edge Fingers?
No
Yes
Typically "No"
Fingers Must Be Gold?
Yes
No
Typically "Yes"
Technology
SMD, both sides, leaded one side
SMD, both sides
SMD, one side
Leaded, one side
Leaded, both sides
SMD one side, opposite side leaded
SMD both sides, leaded one side
SMD both sides, leaded both sides
Die Bond/BGA/Flip Chip
Electrical Test?
Yes
No
(Optional, recommended)
Trace Width / Space Between Traces
.007 / .008
< .005 / < .005
.005 / .005
.006 / .006
.012 / .013
> .012 / > .013
inches
Mask
Both Sides
On One Side
None
Typically "Both Sides"
Mask Type
LPI Gloss
LPI Matt
Wet Mask-Matt (SR1000)
Wet Mask-Gloss (SR1020)
Dry Film
Other, Please Describe
Typically "LPI Gloss"
If You Selected Other, Specify:
Mask Color
Green, Typical
Red
Blue
Black
Legand
Both Sides
On One Side
None
Legand Color
White (Most Common)
Black (Special)
Red (Special)
Yellow (Occasionally)
Final Copper Finish
RoHS-Compliant (Lead-Free)
60/40 Tin Lead, HASL, SMOBC
Entek 106
White Tin (Omikron)
Immersion Gold
Reflowed Solder
Bare Copper
Special Notes (if any)
3072 Characters Allowed: Letters, numbers, spaces, and -_/.()<>{}[]&!?,%^~#@+=|:`
Select a Preliminary Gerber File or Archive to Upload:
(5 MB limit)
Type a Name for the File: (Required for File Upload)
Example: partnumber_gerbers.zip
Select a Preliminary Fabrication Drawing File or Archive to Upload:
(5 MB limit)
Type a Name for the File: (Required for File Upload)
Example: partnumber_fab_drawing.zip